The F-16 fighting falcon rc-jet airplane is a high-performance, extremely fun-to-fly rc-jet. The F-16 rc-jet is an electric ducted fan (EDF) ready-to-fly radio-control 3D aerobatic jet airplane. This rc-jet is based on the F-16 fighting falcon jet aircraft is a high-performance, highly-maneuverable, combat aircraft used by many air forces around the world and is used by the USAF United States Air Force for combat and patrolling of the airspace. The F-16 fighting falcon was initially developed by General Dynamics and is now manufactured by Lockheed Martin. The F-16 is famous for its unique aerodynamic design, high-performance and it's truly awesome capabilities.e electric ducted fan is controlled by the digitally proportional electronic speed controller (ESC). High-power micro servos, battery and receiver are installed inside the fuselage. The EDF is a outrunner brushless motor. The jet features Li-polymer batteries. The f-16 fighting falcon rc-jet is a 4-channel jet.
F-16 RC Jet Design Features
The F-16 rc-jet is very-impressive in design as it features excellent scale appearance. The f-16 rc-jet is precision manufactured with excellent finish. This rc-jet also features excellent decals and covering. The F-16 rc-jet is powered by a 70mm ducted fan unit which enables it to achieve a blistering speed of over 80 mph which is impressive. The F-16 rc-jet is designed as a park-flyer which can be hand-launch and can also take-off from the ground. The f-16 rc-jet is a 4-channel rc-jet airplane which can be used with a FM PPM based transmitter.
With less than 36 oz in weight and a length of almost 30 inches the f-16 rc jet really packs a punch in style and appearance. The f-16 rc-jet has a conventional landing gear with the main-gear and a steerable nose-gear which is linked with the rudder control to make it easy to steer on the ground. With a very impressive speed of 80 mph it is a high-speed jet but it also has excellent flying characteristics. The high-speed is thanks to the very impressive ducted fan unit of this jet airplane. Also, another very good feature of this f-16 radio-control jet is that it enables the pilot to fly it a slower speed which is excellent because many beginner pilots can be apply to fly it and enjoy the fun of it. The rc-jet is designed in such a way so that anyone from beginners to advanced pilots will be able to enjoy it. Another feature of this rc-jet is that it has a strong reinforced fuselage and strong wing structure which is great because in the event the rc-jet does crash serious damage to the rc-jet structure can be avoided.
Now, let's come to the electronics of the F-16 EDF rc-jet. The electric ducted fan is controlled by the digitally proportional electronic speed controller (ESC). High-power micro servos, battery and receiver are installed inside the fuselage. The EDF is a outrunner brushless motor. The jet features Li-polymer batteries. The f-16 fighting falcon rc-jet is a 4-channel jet.
Flying the F-16 RC-Jet
Flying the F-16 rc-jet is so-much fun. The control surfaces of the jet consists of ailerons, elevator, rudder and throttle. The ailerons are present on either side of the wing, the elevator on the horizontal tail and the rudder on the vertical tail. Throttle control is achieved using the electronic speed control. The jet can be easily take-off from the ground and if you require can be hand-launched. Both are easy to do. Once in flight, the true 3D aerobatic nature of the f-16 rc-jet comes into it's own. This jet can be easily flown inverted and so is very stable in inverted flight. Another thing which i liked was the high-roll rate. The f-16 rc-jet has a very impressive roll rate and can be made to perform many aerobatic maneuvers. This jet is truly a 3d flight machine. This jet can easily perform inside and outside loops, rolls and spins, stall turns and more. The high-speed flight has add a lot of dimensions and value to the amount of fun in its flight. Landing this rc-jet isn't difficult and it lands easily on the ground. The airframe is sturdy and strong. Overall, i think this rc-jet airplane manufactured by BlitzRCWorks is a wonderful flying machine and it is a lot of fun. Prices of the model are reasonable as it costs for less than $250. This f-16 rc-jet is quickly becoming one of the popular rc-jet edf airplanes in the market.